Sorry, this product is not available to purchase.
On
sale
Value Brand 70 CFM 4" Duct With Integrated 12W LED Light Round 120V
- 70 CFM
- 60dB
- LED integrated light 12W 1200LM 4000K
- Built-in J-Box for easy wiring
- Galvanized housing resists rust due to humid conditions
Brand | Value Brand |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
| 120 |
Color Temperature (Kelvin)
An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
| 4000 |
Brightness (Lumens)
A rating of the initial light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
| 1200 |
CFM
Cubic feet per minute. a measurement of airflow volume, determined by how many cubic feet of air pass by a stationary point in one minute. Larger homes circulate more air (since there's more space for it to move around), so they will have a higher CFM.
| 70 |
Sones
Measure of noise, used for rating electrical appliances. Under 0.3 sones is extemely quiet. 1.0 sones is roughly equivalent to a refrigerator running. 3.0 sones would be a loud fan, roughly as loud as a face-to-face conversation.
| 9 |
Duct Size (in)
Size in inches for duct required for a bathroom extractor fan.
| 4 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
| 12.25 |
Width (in)
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
| 12.25 |
Depth (in)
For fixtures and ballasts, depth is the measurement of total distance from front to back of the product in inches.
| 5.75 |
Damp Location
Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
| Yes |